Use Instructions

7 Storage
7.1
Unmounting the device
The following tool is required:
n Hex key for M6 x 16
1.
Clean the device (see
Ä Chapter 5.3 “Cleaning the device”
on page 32).
2. Disconnect the USB connection.
3. Firmly hold the keyboad to avoid damage while dismounting.
4. Remove the M6 screws from the hinge.
ð
The Keyboard is dismounted.
7.2
Storing the device
NOTICE!
Material damage caused by incorrect storage.
Incorrect storage can damage the device.
– Pay attention to the handling symbols on the pack-
aging.
–
Comply with the stated storage conditions (see
Ä Chapter 7.2 “Storing the device” on page 39).
When storing the device, comply with the following requirements:
n Use the original packaging.
n Do not store in the open air.
n Always store in a dry, non-dusty place.
n Always shield the equipment from solar radiation.
n Avoid mechanical vibration and shocks.
n Avoid cold weather and extreme temperature fluctuations.
n Refer to section "Environmental conditions" in the “Technical data”
chapter.
Ä Chapter 3.3 “Technical data” on page 16
Storage conditions
Storage
Storing the device
Keyboards - Industrial input devices 39