User's Manual

www.looket.com
User Guide Manual - 11
4. Connect the cradle (D) on the
dual T-tabs (E) on the pedestal
head.
5. Adjust the angle and rotation of
the head by tightening the
head adjustment knob (F).
6. Slide down the device on the
cradle from top to bottom.
7. Connect them with a snap.
◈ How to install into Belt-clip
1. Connect the cradle on the
dual T-tabs of the belt-clip.
2. Slide up the belt-clip with the
cradle on the back side of the
device from bottom to top.
3. Connect them with a snap.