User's Manual

SysOnChip
SOC LBS LOOK’ET User Manual
21
(4) Open the rear cover and insert the SIM card.
(5) Insert the Internal battery. Inserting internal battery means the power On.
(6) You can execute “CONNECT” in the DM program.
You can see the processing status.
(7) After about 25 seconds, Boot process is completed, LEDs for GSM and Power will be blinked 4 times.
Then LOOK’ET will process the application code. Application code will initialize its configuration and goes to the idle
state. User must wait for 35 seconds to enter debugging or control commands.