User's Manual

SysOnChip
SOC LBS LOOK’ET User Manual
18
4.1.2. Software programs
1) USB Driver install file
USB driver installation is needed to connect the LOOK’ET with PC. After completed installing the USB driver, hyper
terminal and DM can be used to control and debug the LOOK’ET.
Refer to the document [1] and [3] for detail description to install USB driver and DM.
2) DM(Diagnostic Monitor) Program
LBS_DM.exe, configuration text file and several DLL files are provided by SOC. These files must be copied together
in one directory of your DM PC. Just execute LBS_DM.exe to invoke the DM program.
Refer to the document [3] for detail description for DM.
3) CC(Control Center) Program
LBS_CONTROL_CENTER.exe, configuration text file and several DLL files are provided by SOC. These files must
be copied together in one directory of your control center PC. Just execute LBS_CONTROL_CENTER.exe to invoke
the DM program.
Refer to the document [3] for detail description for CC.
4) UPGS(Update Server) Program
LBS_REMOTE_UPGRADE_SERVER.exe, binary LOOK’ET file and several DLL files are provided by SOC.
Binary LOOK’ET file must be placed in the C:\LBS_FLASH_FILE directory and other exe and DLL files must be
copied together in one directory of your upgrade server PC.
Refer to the document [4] for detail description for upgrade server.