User's Manual

SysOnChip

SOC LBS LOOK’ET User Manual

4. Basic startup and testing

The SOC LBS LOOK’ET has been made to make installation, testing and configuration simple. For vehicle

installation and testing for correct working after installation we recommend the installer to use a Notebook or Desktop

PC via USB 2.0 interface.

The program for debugging/controlling LOOK’ET is provided in view of both target side and network side.

DM(Diagnostic Monitor) is the target side program and CC(Control Center) is network side program for debugging

and controlling.

Before the LOOK’ET is installed, we recommend configuring the unit functions and setup using the LOOL’ET DM

program including setup configuration. The LOOK’ET has many functions that will allow the unit to operate for

different user applications including security and fleet management.

4.1. Needed accessory and programs

LOOK’ET product has many hardware accessories and software programs to operate correctly.

No. Component name Quantity Remarks

1 LOOK’ET body 1 ea. Hardware.

2 External GPS antenna 1 ea. Hardware.

3 External GSM/GPRS antenna 1 ea. Hardware.

4 12 Pin Vehicle interface connector & cable 1 ea. Hardware.

5 Internal battery 1 ea. Hardware.

6 USB mini-type connector & cable 1 ea. Hardware.

7 RS232 connector & cable Not included. Hardware.

8 Tray for Fix LOOK’ET 1 ea. Hardware.

9 USB Driver install file 1 set. Software.

10 DM(Diagnostic Monitor) Program 1 set. Software.

11 CC(Control Center) Program 1 set. Software.

12 UPGS(Update Server) Program 1 set. Software.

Fig 8. Hardware/Software accessories