User's Manual

Bluetooth Software Suite Users Manual
57
• Using the default settings (the same as those
made during the installation of the Bluetooth
Software Suite). This way is recommended if
both of the above fail. Click:
Follow the onscreen instructions to complete the
configuration of your system for optimal sound
performance of the Bluetooth speaker phone
feature.
LAN Access Settings
Note: This section is only relevant to Windows
2000 users.
As described in the section “LAN”
, every time you
want to access the Local Area Network, you have
to go through the following procedure: First
establish a Bluetooth LAN link between your
computer and LAN access point. Then open the
Direct Cable Connection application and connect
to your LAN access point.
On Windows 2000, however, the Bluetooth
Software Suite can make it a little easier for you to
connect to the LAN: You do not have to open the
Network and Dial-up Connections application
(which is the Windows 2000 version of the Direct
Cable Connection) every time you want to access
the LAN. You can set up the Bluetooth Software
Suite to do it automatically.
Configuration
The settings are done from the LAN Access
Settings dialog box:
1. On the Bluetooth menu, point to Profile
Properties and click LAN Access.
2. At the top of the LAN Access Properties dialog
box, click the tab LAN Access Settings.