User's Manual
Table Of Contents
Bluetooth Software Suite Users Manual
55
Audio Settings
In the Audio Settings dialog box, you can set the
sound quality to be used during the next audio
link. Also, you can select if your computer should
act by default as a Bluetooth speaker phone or
as a Bluetooth audio device. (For a detailed
explanation of either of those features, please see
the section “Audio”
).
To open the Audio Settings dialog box:
1. On the Bluetooth menu, point to Profile
Properties, and click Generic Audio.
2. At the top of the Audio Properties dialog box,
click the tab Audio Settings.
• Audio quality: In this item you can set the
sound quality to be used during the next audio
link.
Generally speaking, the higher the sound
quality the better. However, the higher the
quality, the more of the capacity of the
Bluetooth unit is needed for the link. If you
want to be able to transfer data at the same
time as sound, you should select medium or
low audio quality.
The default setting is Low.
Note: The audio quality can be set in both
the Audio Settings dialog box and the
Headset Settings dialog box. Changing the
setting in either of these dialog boxes will
automatically change the setting in the other.
• Audio path: In this item, you can select either
Bluetooth Audio Device or Bluetooth
Speaker Phone as the default setting.
By default, your computer is set up as a
Bluetooth speaker phone.
Note: For optimal sound performance when
using your computer as a bluetooth speaker
phone, you should run the Bluetooth Speaker
Phone Setup Wizard. See the following
section, “Bluetooth Speaker Phone Setup
Wizard”.