User's Manual

Bluetooth Software Suite Users Manual
54
Headset Settings
The profile Headset supports two services:
Headset and Audio Gateway (cf. the sections
“Headset”
and “Audio Gateway”). In the Headset
Settings dialog box, you can make settings
concerning the sound quality of the next Headset
or Audio Gateway link. Also, you can choose for
the sound to be enabled automatically when a
Headset or Audio Gateway link has been
established.
To open the Headset Settings dialog box:
1. On the Bluetooth menu, point to Profile
Properties, and click Headset.
2. At the top of the Headset Properties dialog
box, click the tab Settings.
• Audio Quality: In this item you can set the
sound quality to be used during the next
Headset or Audio Gateway link when audio is
enabled (i.e. when the Audio service is used).
Generally speaking, the higher the quality, the
better. However, the higher the quality, the
more of the capacity of the Bluetooth unit is
needed for the link. If you want to be able to
transfer data at the same time as sound, you
should select medium or low audio quality.
The default setting is Low.
Note: Audio quality settings affect the
settings for the profile Generic Audio (which
is used when during a Headset/Audio
Gateway link the audio is enabled).
Consequently, it makes no difference if you
set the audio quality in the Headset Settings
dialog box or in the Audio Settings dialog
box. Changing the setting in either of these
dialog boxes will automatically change the
setting in the other.
• On connect: When this item is checked, the
audio is automatically enabled when you
establish a Headset or Audio Gateway link.
You will then not have to enable the audio
manually (as described in the sections
“Headset”
and “Audio Gateway”). Simply
establish a Headset or Audio Gateway link,
and the Audio service will be activated at the
same time. By default, this item is not checked.