User's Manual

Bluetooth Software Suite Users Manual
43
Connecting to LAN
Once you have configured the Direct Cable
Connection, every time you want to get on the
LAN, go through the following procedure:
1. Establish a Bluetooth LAN link between your
computer and LAN access point. This can be
done from either device. To establish the link
from the Bluetooth Neighborhood on your
computer:
• Drag the LAN icon from the Local Services
bar to the icon representing the LAN access
point in the list view.
Or:
• First carry out service discovery on the LAN
access point. Then drag the LAN icon from
the Local Services bar to the remote
Bluetooth LAN service.
2. Open the Direct Cable Connection, check your
settings, and click connect.
You are on the LAN!
On Windows 2000, you do not have to go through
step 2 of the procedure described above. You can
set up the Bluetooth Software Suite to do it
automatically. For information on how to set up
your program for this, please see the section “LAN
Access Settings”.