Bluetooth SOFTWARE SUITE Users Manual
Bluetooth Software Suite Users Manual About this manual This User’s Manual will provide you with the information needed to make the most of the 1 Bluetooth™ Software Suite. If you need basic information on the Bluetooth technology, please refer to the Beginner's Guide accompanying the Bluetooth Software Suite. Both the Beginner's Guide and this User's Manual are included on the Bluetooth Software Suite CDROM.
Bluetooth Software Suite Users Manual Contents About this manual 2 CAUTION 2 Getting started 5 Bluetooth Neighborhood 5 Introduction 5 Opening Bluetooth Neighborhood 6 Bluetooth Neighborhood window 7 Profiles and services 8 List view 9 Basic functions 11 Naming your local device 11 Device discovery 12 Service discovery 13 Link establishment 14 Disconnecting 15 Status information 15 View details 16 Device folders 18 Online help 19 Local services 20 Object transfer 20 Making default business card availab
Bluetooth Software Suite Object Push Settings 51 Object Push - Security 52 File Transfer Settings 53 Headset Settings 54 Audio Settings 55 Bluetooth Speaker Phone Setup Wizard 56 LAN Access Settings 57 Dial-up Networking Settings 59 Users Manual Index 79 Bluetooth Neighborhood properties 60 General 60 Settings 61 Device discovery 62 Trust 63 Security 65 Bonding 67 Bluetooth unit settings 69 Enabling/disabling Bluetooth unit 69 Indication of Bluetooth unit state 69 Remote device settings 70 Remote devi
Bluetooth Software Suite Users Manual Getting started Bluetooth Neighborhood Introduction With the Bluetooth Software Suite, you can establish wireless links between your computer and other Bluetooth enabled devices.
Bluetooth Software Suite Users Manual Opening Bluetooth Neighborhood The Bluetooth Neighborhood and Windows Explorer are highly integrated. Therefore, Windows Explorer is the natural place to open the Bluetooth Neighborhood: Open Windows Explorer, and select the Bluetooth Neighborhood among the folders in Windows.
Bluetooth Software Suite Users Manual Bluetooth Neighborhood window When you open the Bluetooth Neighborhood, the * following window appears : 1: Menu bar: Contains standard Windows pulldown menus and a Bluetooth menu. We will deal with the Bluetooth menu in later sections. Furthermore, from the menu bar, you can access the Bluetooth Software Suite online help. 2: Tool bar: Contains standard Windows tools like Back, Forward, View, etc.
Bluetooth Software Suite The setup of the Bluetooth Neighborhood window depends on your Windows Explorer setup. Thus, the above example does not show all the standard Windows components that may be added to the window. Users Manual Profiles and services Interoperability depends on profiles Any Bluetooth device has at least one profile, i.e. an application that you can use the device for. When two devices are to interoperate, i.e. communicate with each other, they must have a shared profile.
Bluetooth Software Suite Users Manual List view The list view in the main window contains three elements: My Inbox, My Shared Files, and a list of discovered remote devices. When an item is selected in the Bluetooth Neighborhood, for instance My Inbox or a remote device, the list view will display the contents of that item. (In this connection, the contents of a remote device are the services it supports).
Bluetooth Software Suite Remote devices or services: The devices shown in the main window list view are the remote Bluetooth devices that your device has discovered during device discovery. The icons show what kind of device each remote device is (device class), like the desktop and laptop computer icons in the following example: Users Manual When service discovery has been carried out on a remote device, the list view will change to showing the services facilitated by the remote device in question.
Bluetooth Software Suite Users Manual Basic functions Naming your local device Before you start communicating with remote users, you should select the name that you want your device to present itself with when discovered by remote devices. To do so: 2. At the top of the dialog box, click the tab Settings. 1. On the Bluetooth menu, click Bluetooth Neighborhood Properties: The following dialog box opens: 3.
Bluetooth Software Suite For information on the item Bluetooth Device Class in the dialog box shown above, see the section “Bluetooth Neighborhood properties” – “Settings”. Users Manual Device discovery Before your local device can get to communicate with a remote Bluetooth device, it needs to discover the remote devices that are available within range. This activity is called device discovery. To carry out device discovery: On the Bluetooth menu, click Device Discovery.
Bluetooth Software Suite Users Manual Service discovery Before trying to establish a link to a remote device, it may be useful to know which services the device facilitates. To find out, you can carry out service discovery. Double-click the remote device in the main window list view: Note: The main window list view does not show your local device, only the discovered remote ones. Alternative ways of carrying out device discovery: • When the main window list view is displayed, press F5.
Bluetooth Software Suite Users Manual Link establishment When you have carried out service discovery, you can establish a link to the remote device. You can make use of any service that both your device and the remote device support. Drag the local service to the corresponding remote service: refer to the section about the local service in question. If link establishment is not carried out successfully: The remote user may have set up his device to reject link establishment attempts (cf.
Bluetooth Software Suite Users Manual Disconnecting Status information To disconnect a link established to a remote device: The Bluetooth Neighborhood status bar provides you with information on the item currently selected in the Bluetooth Neighborhood, like the name of a remote device (“Eddie’s Notepad”) or My Inbox. Also, message boxes keep you informed of the progress of any activity, and let you know if anything goes wrong.
Bluetooth Software Suite Users Manual View details One of the Windows-like features of the Bluetooth Software Suite is the possibility of changing the settings of the list view. What is of special interest, however, is the Details information of the list view: 1. 2. Details concerning remote devices In the main window, the list view can display information on each of the remote devices discovered: On the menu bar, click View. Click Details.
Bluetooth Software Suite Details concerning remote services When you have carried out service discovery on a remote device, the list view can display the following information on the services that the remote device supports: • Name: The name of the remote service. • Description: The name of the profile that supports the remote service. If your device features the same profile, interoperability between the two devices is possible.
Bluetooth Software Suite Users Manual Device folders What is a device folder? In the Bluetooth Neighborhood main list view, you can create device folders: folders containing a number of remote devices. You can communicate with a device folder as with any single remote device. When doing so, you will be communicating with all the devices in the folder at the same time. You can for instance use this feature to distribute objects or files to more than one device at a time. 3.
Bluetooth Software Suite Users Manual Online help Each of the remote devices included in the device folder “Conference” will now receive the business card. The Bluetooth Software Suite features online help similar to that of Microsoft Windows. To open the Bluetooth Software Suite online help, click the menu bar item Help or press F1 on your keyboard. Help provides you with links to the online version of this User’s Manual.
Bluetooth Software Suite Users Manual Local services Object transfer With the Bluetooth Neighborhood, you can transfer such objects as business cards, e-mail messages, calendar objects, and notes. If Microsoft Outlook is installed on your computer, that is where you create and send objects. If Microsoft Outlook is not installed on your computer, you can use the Object Editor included in the Bluetooth Software Suite.
Bluetooth Software Suite Users Manual A new icon on the Local Services bar shows that your default business card is now available for transfer to remote devices: From the Object Editor 3. Drag the item containing your own contact information into the Local Services bar: An alternative way of registering your default business card is by means of the Object Editor. To open the Object Editor: 1. On the Bluetooth menu, point to Profile Properties, and click OBEX Object Push.
Bluetooth Software Suite Users Manual 3. In the item Default Business Card, click the button Create New. The Object Editor opens: 2. At the top of the dialog box, click the tab Object Push Settings. 4. In the Object Editor, type the information you want to include in your default business card. You can include information about your name and one or more e-mail addresses, telephone numbers, and addresses. 5. To save the business card: On the Object Editor File menu, click Save.
Bluetooth Software Suite 6. To quit the Object Editor: Click the OK button. You will now return to the dialog box OBEX Object Push Properties – Object Push Settings. Here you will see the name of your default business card, which is the same as the name typed in the Object Editor. Users Manual Editing an existing business card in the Object Editor: As appears from the information above, the Object Editor can be used to create a new default business card.
Bluetooth Software Suite Users Manual Business card transfer Before your default business card can be transferred to remote devices, you must make it available among your local services as described in the section "Making default business card available". To send your business card to a remote device, drag the card icon to the remote Inbox folder or remote device (or device folder).
Bluetooth Software Suite Sending objects directly from MS Outlook Microsoft Outlook users can send objects (like messages or notes) directly from Microsoft Outlook: Drag the object either to the remote Inbox folder or to the remote device (or device folder): Users Manual Receiving objects When your local Bluetooth device receives an object (a default business card, message, note, or calendar object) from a remote device, the object is placed in My Inbox: If Microsoft Outlook is installed on your comput
Bluetooth Software Suite Users Manual Creating objects in the Object Editor If Microsoft Outlook is not installed on your computer, you can use the Object Editor to create objects – messages, notes, and cards. Note that objects created in the Object Editor are not saved as objects but as files. You can then transfer these files as you would any file in the Bluetooth Neighborhood (cf. “File transfer”). 1. To open the Object Editor: Click Start, point to Programs, point to Bluetooth Software Suite ...
Bluetooth Software Suite Users Manual Cards are created in the Object Editor itself (by typing the information you want to include); messages and notes are created in a new window. The following example shows the window that pops up on clicking VMessage as shown above: 5. Select the location and name of the new file. 6. Click Save. When you have saved the file, you can transfer it like any file using the Bluetooth Neighborhood. For more information, see “File transfer”. 3.
Bluetooth Software Suite Users Manual File transfer File transfer is a way of sharing files with others. In the Bluetooth Neighborhood, you can make a file available to a remote user by placing it in the folder My Shared Files: When a remote user opens your folder My Shared Files, he will have access to the file you placed in it. Sending a file to a remote device When a remote user has carried out service discovery on your device, he can open your folder My Shared Files and the files in it.
Bluetooth Software Suite Users Manual No matter which way you choose to transfer a file to a remote device, the user of that device will receive the file in his Shared Files folder. Receiving files When your local Bluetooth device receives a file sent from a remote device, the file is placed in My Shared Files. You can then open the received file directly from My Shared Files, or you can drag the file to wherever you want to store it.
Bluetooth Software Suite Users Manual Headset The Headset service makes it possible to have phone conversations using your computer as a speaker phone. This is how the Headset service works: Sound can be transferred via a Bluetooth link between your Bluetooth enabled phone and computer. The phone works as a “gateway” for the sound to and from the computer. This makes it possible to carry out a phone conversation using the (built-in or external) speaker and microphone of your computer.
Bluetooth Software Suite When the audio is enabled, the Bluetooth link is making use of two profiles: Headset and Generic Audio. Or, in other words, in addition to the Audio Gateway service, your Bluetooth link involves the Audio service. Users Manual Note: You can make settings for automatic enabling of audio on link establishment and for sound quality; please see the section “Headset settings”.
Bluetooth Software Suite Users Manual Audio Gateway Scenarios Supported by the Headset profile, the local Audio Gateway service makes it possible to transfer sound between your computer and a Bluetooth enabled headset. Your computer is used as a “gateway” for the sound. The Audio Gateway service can be used for a number of things. You can for instance: This is how the Audio Gateway service works in connection with music files: • Listen to music from MP3 and MIDI files or the like.
Bluetooth Software Suite opposite direction: When you speak into the microphone of the headset, the sound is transferred via the Bluetooth Audio Gateway link to your computer. The sound is then sent via the Internet/Intranet to the other NetMeeting participants. The meeting can proceed ... Note: To participate in a NetMeeting, you need Microsoft NetMeeting (or a similar application). Before the meeting, each participant has to set up his NetMeeting application for it.
Bluetooth Software Suite Users Manual Audio Gateway link establishment In the previous section, we took a look at the principles behind various ways of using the Audio Gateway service. Whichever of the mentioned applications you want to use, you need to establish a Bluetooth Audio Gateway link between your computer and Bluetooth enabled headset. The link can be established by both devices.
Bluetooth Software Suite Users Manual Audio An audio link makes it possible to transfer sound from one Bluetooth device to another. There are basically two ways of using an audio link: Your computer acts as either a Bluetooth speaker phone or as a Bluetooth audio device. The Bluetooth speaker phone feature makes it possible to use two or more computers like walkie-talkies. You can use the (built-in or external) microphone and speaker of your computer for the conversation.
Bluetooth Software Suite Users Manual Link establishment Enabling/disabling PC speaker There are two ways of establishing an audio link: Either drag the local Audio service to the remote device (or device folder). Or carry out service discovery first, then drag the local Audio service to the remote Audio service: Using your computer as a Bluetooth speaker phone (the Audio Service “walkie-talkie feature”) involves using the PC speaker.
Bluetooth Software Suite Users Manual Bluetooth COM port General information What is a Bluetooth COM port? Physical communications (COM) ports are used when two serial devices are connected by means of a cable. A Bluetooth COM port, however, is a virtual COM port providing a wireless alternative to a physical one.
Bluetooth Software Suite New Bluetooth COM ports and interoperability Some users may want to add one or more additional Bluetooth COM ports to the computer. This is necessary if you want to make use of the Serial Port Profile, for instance to use a serial application like HyperTerminal to transfer data between two Bluetooth enabled computers. The same profile must be associated with the local Bluetooth COM port and the remote one you want to connect to.
Bluetooth Software Suite Users Manual Adding Bluetooth COM ports To add a Bluetooth COM port: 1. In the Bluetooth Configuration Tool window, click Add. The following dialog box opens: Note: Before you can use the new Bluetooth COM port, you have to restart your computer. 2. Use the arrows to go to the Bluetooth COM port you want to add and the profile you want to associate with it. In the above example, the Serial Port Profile is being associated with Bluetooth COM port 3.
Bluetooth Software Suite Deleting Bluetooth COM ports If you want to delete a Bluetooth COM that you no longer need: 1. In the Bluetooth Configuration Tool window, highlight the Bluetooth COM port you want to delete, for instance COM2: Users Manual 3. To confirm that you want to delete the Bluetooth COM port, click Yes. The Bluetooth COM port will now be removed from the Local Services bar. Note: Windows NT users have to restart the computer for the changes to take effect.
Bluetooth Software Suite To change the settings: 1. In Existing COM ports, click the Bluetooth COM port in question. 2. In Associated Profiles, check the profiles you want to associate with the Bluetooth COM port, or remove the ones you no longer want to be associated with it. 3. Click OK.
Bluetooth Software Suite Users Manual LAN To be able to make the most of the LAN service, some previous knowledge of Microsoft networking is required. If necessary, please refer to the Microsoft Windows online help for information on Microsoft networking. What is Bluetooth LAN? Configuring Direct Cable Connection Both your computer and the LAN access point have to support the Microsoft Windows * component Direct Cable Connection .
Bluetooth Software Suite Users Manual Connecting to LAN Once you have configured the Direct Cable Connection, every time you want to get on the LAN, go through the following procedure: 1. Establish a Bluetooth LAN link between your computer and LAN access point. This can be done from either device. To establish the link from the Bluetooth Neighborhood on your computer: • Drag the LAN icon from the Local Services bar to the icon representing the LAN access point in the list view.
Bluetooth Software Suite Users Manual DUN What is Bluetooth DUN? Configuring Dial-up Networking application Dial-up Networking (DUN) is used for accessing the Internet. To use DUN, first you have to configure your Dialup Networking application. This is a standard Windows component. Please refer to the Windows on-line help for information on how to open the Dial-up Networking application. Follow the on-screen instructions.
Bluetooth Software Suite Users Manual • Drag the DUN icon from the Local Services bar to the icon representing the Bluetooth enabled modem in the list view. Setting up the DUN profile to dial up automatically is done in the Dial-up Networking Settings dialog box: Or: 1. On the Bluetooth menu, point to Profile Properties, and click Dial-up Networking. 2. At the top of the Dial-up Networking Properties dialog box, click the tab Dial-up Networking Settings. The following dialog box appears: 3.
Bluetooth Software Suite Create New or edit the selected recipient by clicking Edit Selected. Now, when you have established a link between your computer and a Bluetooth enabled modem, a dialog box will appear. Follow the onscreen instructions to connect to your Internet Service Provider. Users Manual FAX What is Bluetooth FAX? The procedure for sending and receiving fax messages by means of a computer is basically the same, whether you use Bluetooth or not: First connect a modem to your computer.
Bluetooth Software Suite Connecting computer to Bluetooth enabled modem The first step is to establish a link between your computer and a Bluetooth enabled modem: Carry out device discovery to have the Bluetooth Neighborhood list view display an icon representing the Bluetooth enabled modem. Then: Users Manual COM ports higher than 4. For more information on Bluetooth COM ports, see “Bluetooth COM ports” – “General information” and “Bluetooth COM port settings”.
Bluetooth Software Suite Users Manual Network Network link establishment In this section, we will focus on setting up and establishing Bluetooth networks. We will assume that you have some previous experience in ordinary, i.e. wired networks using Microsoft networking. If that is not the case, please refer to the Microsoft Windows online help for information on Microsoft networking.
Bluetooth Software Suite Users Manual Local device settings Local profile properties General information The Bluetooth Software Suite provides you with general information on the profiles that your device supports. For each profile, you can see: • Which version of the profile your device features; • A description, i.e. the name of the profile; • The company name; • The copyright holder.
Bluetooth Software Suite Users Manual Enabling/disabling profile You can enable or disable each of the profiles that your device supports. If you enable a profile, remote users will be allowed to access the services associated with the profile. If you disable a profile, remote users will not be allowed to access the services associated with the profile. In the item Activate Profile, you can now enable or disable the profile. Enabling/disabling a profile is done from the Profile Properties dialog box.
Bluetooth Software Suite Users Manual Object Push Settings The profile OBEX Object Push is used for transferring objects: messages, notes, cards (including the default business card), and calendar objects. In the Object Push Settings dialog box, you can view or edit the location of the physical Inbox folder and the default business card. • Object Inbox: By default, the “physical” Inbox folder is placed in My Documents in a folder named Bluetooth.
Bluetooth Software Suite Users Manual Object Push - Security The profile OBEX Object Push is used for transferring objects: messages, notes, cards, and calendar objects. In the Security dialog box, you can make decisions concerning the security aspects of receiving and sending objects. To open the Security dialog box: 1. On the Bluetooth menu, point to Profile Properties, and click OBEX Object Push. 2. At the top of the OBEX Object Push Properties dialog box, click the tab Security.
Bluetooth Software Suite Users Manual File Transfer Settings The profile OBEX File Transfer is used for transferring files. In the File Transfer Settings dialog box, you can view or edit the location of the physical My Shared Files folder. Furthermore, you can make decisions concerning the security aspects of remote users’ access to the files in “My Shared Files”. • Shared Files folder: By default, the “physical” shared files folder is placed in My Documents in a folder named Bluetooth.
Bluetooth Software Suite Users Manual Headset Settings The profile Headset supports two services: Headset and Audio Gateway (cf. the sections “Headset” and “Audio Gateway”). In the Headset Settings dialog box, you can make settings concerning the sound quality of the next Headset or Audio Gateway link. Also, you can choose for the sound to be enabled automatically when a Headset or Audio Gateway link has been established. To open the Headset Settings dialog box: 1.
Bluetooth Software Suite Users Manual Audio Settings In the Audio Settings dialog box, you can set the sound quality to be used during the next audio link. Also, you can select if your computer should act by default as a Bluetooth speaker phone or as a Bluetooth audio device. (For a detailed explanation of either of those features, please see the section “Audio”). To open the Audio Settings dialog box: 1. On the Bluetooth menu, point to Profile Properties, and click Generic Audio. 2.
Bluetooth Software Suite Users Manual Bluetooth Speaker Phone Setup Wizard During the installation of the Bluetooth Software Suite, some default settings were made automatically for the sound of the Bluetooth speaker phone feature. In many cases, however, these default settings will not secure your system the best sound quality possible. Therefore, we recommend that you run the application the Bluetooth Speaker Phone Setup Wizard to configure your system for optimal sound performance.
Bluetooth Software Suite • Using the default settings (the same as those made during the installation of the Bluetooth Software Suite). This way is recommended if both of the above fail. Click: Follow the onscreen instructions to complete the configuration of your system for optimal sound performance of the Bluetooth speaker phone feature. Users Manual LAN Access Settings Note: This section is only relevant to Windows 2000 users.
Bluetooth Software Suite Users Manual 4. Select Connect directly to another computer and follow the onscreen instructions to configure the connection to your LAN access point. Note: When prompted to “Select a Device”, select COM7 (default for Bluetooth LAN). The configuration in the Network Connection Wizard is completed when you have specified a name for the new connection, for instance “My LAN Access Point”. You will then return to the LAN Access Settings dialog box. 5.
Bluetooth Software Suite 6. Click OK. Link establishment Now, every time you want to connect to the LAN, simply establish a Bluetooth LAN link between your computer and LAN access point, for instance by dragging and dropping in the Bluetooth Neighborhood. The program will then automatically connect to the LAN access point – and you will be on the LAN. Users Manual Dial-up Networking Settings For information on Bluetooth Dial-up Networking, please refer to the section “DUN”.
Bluetooth Software Suite Users Manual Bluetooth Neighborhood properties General The Bluetooth Software Suite provides information on the properties of the Bluetooth Neighborhood. This information is accessible from the Bluetooth Neighborhood Properties dialog box. To open this: On the Bluetooth menu, click Bluetooth Neighborhood Properties.
Bluetooth Software Suite Users Manual Settings In the Bluetooth Neighborhood Properties – Settings dialog box, you can set such identity information as the name and class of your local device. To open the dialog box: 1. On the Bluetooth menu, click Bluetooth Neighborhood Properties. 2. Click the tab Settings.
Bluetooth Software Suite Users Manual Device discovery In connection with device discovery, you can make a number of settings in the Bluetooth Neighborhood Properties – Device Discovery dialog box. To open this dialog box: • In Device Discovery you can choose for device discovery to take place only when you activate the function manually (which is the default setting), or for device discovery to be initiated automatically at certain intervals.
Bluetooth Software Suite • In Expire Discovered Devices you can decide to have discovered remote devices removed automatically from the Bluetooth Neighborhood list view when they have not been seen for a specified period of time. Note that if the dialog box item Previously Discovered Devices is not selected, the list view will only display the remote devices discovered during the latest device discovery.
Bluetooth Software Suite Users Manual You can decide whether your device should: Advanced link policy – Reject a link establishment attempt; or – Prompt you before accepting link establishment; or – Accept link establishment automatically. (This is the default setting).
Bluetooth Software Suite accept link establishment. The location of each remote device (i.e. the box it is placed in) indicates which default trust relationship settings have been selected for it. To change the trust relationship setting for a device in the Advanced Link Policy dialog box: Drag the device from its present position into the box representing the trust relationship you want for the device.
Bluetooth Software Suite • Security Mode can be set to either No Security or Link level security. If a device has selected link level security, no remote device can connect to it without bonding (see “Bonding”). Furthermore, only when you have selected link level security can you use encryption (see below). • Encryption Mode can be enabled or disabled. Based on the use of a link key, this feature can only be enabled when link level security has been selected (see above).
Bluetooth Software Suite Users Manual Bonding Bonding refers to the creation of a link key – a bond – between two devices. Bonding is used when a device requires link level security (see “Security” for information on how to do so). When a remote device attempts to connect to the device requiring link level security, the users of both devices will be prompted for a password. They must then enter the same password.
Bluetooth Software Suite • Users Manual In Default Bluetooth Bonding Expiration, you can set bonding to expire when the link is disconnected; after a specified period of time; or never. (The default setting is: Never). Note: The settings you make in the Bluetooth Neighborhood Properties – Bonding dialog box are default settings that will be applied to all remote devices.
Bluetooth Software Suite Users Manual Bluetooth unit settings Indication of Bluetooth unit state The settings of the Bluetooth unit are controlled from the Bluetooth Control Center. From this application, which is located in the lower right corner of the screen, you can enable/disable the Bluetooth unit. Also, the Bluetooth Control Center icon indicates the state of the Bluetooth unit.
Bluetooth Software Suite Users Manual Remote device settings Remote device properties General For information on the properties of a remote device: 1. Right-click the remote device. 2. Click Properties. The Remote Device Properties – General dialog box opens. At the top of this dialog box, you will see the name of the remote device. In addition, the box contains the items General Information, Historical Information, and Services used.
Bluetooth Software Suite • • • General Information provides such identity information on the remote device as its address, device class, and service class. Historical Information tells you when the device was last seen by your device, and when it was last linked to it. Services used shows which services of the remote device are currently connected to your local device, if any. Also, you can see which role the remote device plays in the piconet, i.e. master or slave.
Bluetooth Software Suite Users Manual • Device Bonding Expiration allows you to make settings concerning the duration of bonding between your device and the remote one. You can set the bonding to expire when the link is disconnected, after a specified period of time, or never. (The default settings is: Never) For more information on bonding, see "Bonding".
Bluetooth Software Suite Users Manual Diagnostics After the installation, it is recommendable to check that the hardware for the Bluetooth Software Suite has been installed properly. This is done by performing a loopback test. This test is carried out from the Bluetooth Configuration Tool: 1. Open the Microsoft Control panel. 2. Double-click Bluetooth Configuration Tool. The Bluetooth Configuration Tool dialog box opens: 3. Click the tab Diagnostics.
Bluetooth Software Suite Users Manual Appendices Appendix A: Profiles The following table shows which profiles the Bluetooth Software Suite currently supports and which role each profile plays: The profile: Ethernet Network OBEX File Transfer OBEX Object Push Serial Port Generic Access Service Discovery Application Dial-up Networking Fax LAN Access Generic Object Exchange Headset Generic Audio Supports the following: Network service File transfer Object transfer Bluetooth COM port service All other prof
Bluetooth Software Suite Users Manual Appendix B: List view icons In the Bluetooth Neighborhood list view, the following icons are used to represent remote devices and remote services respectively: Unclassified phone Remote devices: LAN access point Desktop computer Laptop computer Server-class computer Handheld PC/PDA Palm sized PC/PDA Cellular phone LAN access point, 33-50% utilized Audio – headset Unclassified audio Modem Peripheral Unclassified Cordless phone Smart phone 75
Bluetooth Software Suite Users Manual Remote services: Audio Bluetooth COM port LAN DUN FAX Business card Network Inbox Shared Files Device folder 76
Bluetooth Software Suite Users Manual Appendix C: Regulatory statements General This product complies with any mandatory product specification in any country where the product is sold. In addition, the product complies with the following. Note that any changes or modifications to this equipment not expressly approved by the manufacturer may void the FCC authorization to operate this equipment.
Bluetooth Software Suite Users Manual Japan 78
Bluetooth Software Suite Users Manual Index About this manual, 2 Advanced link policy, 64, 65 Audio, 35 Audio device, 35 Audio Gateway, 32 Audio Gateway link establishment, 34 Audio link establishment, 36 Audio path, 55 Audio quality, 54, 55 Audio settings, 55 Audio, enable/disable, Audio Gateway, 34 Audio, enable/disable, Headset, 30 Basic functions, Bluetooth Neighborhood, 11 Bluetooth audio device, 35 Bluetooth bonding, 67 Bluetooth COM port link establishment, 41 Bluetooth COM port settings, 38 Bluet
Bluetooth Software Suite Device discovery period, 62 Device discovery, manually or automatically, 62 Device discovery, settings, 62 Device name, 11 Devices, icons, 75 Devices, remote, in list view, 10 Diagnostics, 73 Diagnostics dialog box, 73 Dial-up networking settings, 59 Disabling Bluetooth unit, 69 Disconnecting, 15 Discoverability mode, 66 DUN, 44 EFTA, 77 Enabling Bluetooth unit, 69 Encryption mode, 66 European Union (EU) and EFTA, 77 Expire discovered devices, 63 FAX, 46 File transfer, 28 File tran
Bluetooth Software Suite Objects, receiving, 25 Objects, sending directly from Microsoft Outlook, 25 Online help, 19 PC speaker, enable/disable, 36 Previously discovered devices, 62 Profile properties, 49 Profiles and services, 8 Profiles, interoperability, 8 Profiles, list, 74 Receiving files, 29 Receiving objects, 25 Regulatory statements, 77 Remote device properties, 70 Remote device properties – General dialog box, 70 Remote device properties, general information, 71 Remote device settings, 70 Remote d