User's Manual

5
3. Operation
The Whole operation of the GSET System is done via the System PC.
The GSET Sensors are powered over the Ethernet cable coming from the Main Switch
box.
The main System power switch is located on the Main Switch Box and needs to be
Switched-On in order to power up the GSET Sensors.
Switching-Off this Switch will power off all the GSET Sensors.
Except for switch up the power for the GSET Sensors, all other operating action are
done by the user from the PC Screen.
Following are Operating instructions for the System PC.
Generally speaking, the PC should be always-on and doesn’t have to be turned off.
The PC is powered via a UPS connected directly to the AC mains.
The PC is based on WIN-10.
Logging in to the GSET System PC is as follows:
User Name: [e-mail]
Password: sysmetric2018
* xyzt stands for GSET system number.