User's Manual

4
2. Functionality
The GSET System is capable of performing the following functions:
A. Measure the thickness of the near end Pipe wall
B. Measure the thickness of the far end Pipe wall
C. 360⁰ Pipe wall thickness
D Measure the Pipe Diameter
E. Measure the Pipe Ovality
The measurements are presented on the PC Screen and collected into a report file,
which can be downloaded from the PC and used for QC analysis.
Optional functionality is to communicate the real time measurements from the PC to
the PLC which controls the Pipe Production Line, to enable a closed-control-loop for
the Pipe production.
Performance:
- Pipe diameter range: from 100mm to 1200mm
- Pipe wall thickness range: from 10mm to 100 mm