User's Manual

3
1. System Description
GSET is a monitoring & measurement solution, which supports the production of
plastic pipes. The GSET systems consists of several GSET Sensors, each is used to
monitor and measure a different sector of the pipe perimeter. A complete system
allows 360 degrees monitoring and measurement of the pipe wall thickness.
The GSET Sensor is based on using millimetric radio waves, and employing a short
Radar technology, to detect the thickness of the near end and far end pipe walls.
The measurement is done in real time and on a continuous basis, while the GSET
Sensors are positioned on a dedicated rack, near the pipe production line.
The GSET sensor does not have any physical contact with the measured pipe,
therefore the Sensor is agnostic to the pipe temperature.
A typical GSET System includes multiple GSET Sensors, mounted over a dedicated
rack, at different angles, pointing towards the center of the pipe.
The GSET Sensors perform and forward the Measurements to a centralized PC which
processes the information gathered from all the GSET Sensors, to compose the
complete Pipe Measurements view and present it on the screen.
The GSET System includes a 24V DC PS to power the GSET Sensors and an Ethernet
Switch to collect and route the Sensors data to the System PC.