User's Manual

INSTALLING THE RECEIVER

INSTALLING THE CAMERA

oPERATION

1. Connect WVRX1 cable to Voyager Monitor or use adapter cable for power,

video, and audio.

1. Choose a location so you can easily splice the

power and ground connections.

2. Using a voltage meter, measure the power source

wires to determine positive/negaive polarity.

2. Align the antenna to its upright position.

1. Press the power button on the monitor and turn on power to camera.

WVRXCAM1

LCD Monitor

RED (+12VDC)

BLACK (GROUND)

31300006

SELE CT

VOL UME

Installation

Antenna Vertical

Hex Socket Head M4 x M6L Stainless screw

Flat Washers 4. 5x9. 5x1mm Stainless

Allen wrench

Screw For Use

IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,the antenna(s) used for 

this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not 

be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the 

device is permitted. Any change to the antenna or the device could result in the device exceeding the RF 

exposure requirements and void user’s authority to operate the device.