User's Manual

6
1.2 Function description
1.2.1 Initial setting
Display
Descriptions
Pic 1
Pic 2
Initial setting (Pic 1)
1. When power on, display HOME page.
2. And display battery voltage.
3. And then display warning symbol, and
play welcome message.
4. Enter Monitoring mode, and receive
sensors signal.
5. Sensors setup completed. The factory
default for pressure unit is psi , after
receiving the normal, warning symbol will
disappear. (Pic2)
Note 1: Voice Monitor and TPMS Sensor
have been paired. If adjustments are
made in “ Settings”, please change the
settings in “ Voice Monitor”.(1.2.3-1.2.4)