User's Guide

STEP 1: Loosening the tire
Remove the valve cap and core and deflate the tire. Use the
bead loosener to unseat the tire bead.
STEP 2: Dismount the tire from the wheel
STEP 3: Dismount the original sensor
With a screwdriver remove the fastening screw and sensor
from the valve stem. Then loosen the nut and remove the
valve.
ST
EP 4
-
1: Mounting sensor and valve
Apply tire or lube solution to the rubber valve stem. Line the
sensor up with rim hole and attach a standard TTV.
STEP 4-2: Mounting sensor and valve
Pull in tool to the end of the valve. Pull the valve stem straight
the valve hole. Note the rubber bulb of the valve resting
against the rim.
STEP 5: Mounting the tire
Clamp the rim onto the assembly machine so that the valve
faces the assembly head at an angle of 180°