User Manual

If the Setting is “OFF” the sensitivity of the wheel will be controlled by the Game
settings or the driver settings. This should work fine with most games.
Use this mode for all PC games and make the adjustment in the driver instead.
900 /360 / 180
In case you are not able to choose the sensitivity in a Playstation 3 game, you can
force the wheel to a certain sensitivity. The value shows the wheel rotation which is
needed for a full rotation in the game.
Force Feedback [show LED]
0 / 33 / 66 / 100
Adjust the percentage of the total Force Feedback strength.
Vibration
0 / 33 / 66 / 100
In the wheel rim are two additional vibration motors which can be controlled by the
game if a game supports it. By default the vibration motors are synchronized with the
gas pedal to let you feel the vibration of the motor.
You can adjust the percentage of the vibration strength you want.
Calibration
If the H-pattern gear stick (7GS) is not working properly it might require new
calibration. Please go through the following steps.
- Connect the power supply to the base
- Press “start button” + “TUNING button” at the same time -> The LED display will
show G_n
- Bring the 7GS into neutral position
- Press the “start button” -> The display will now change to G_r
- Enter reverse gear
- Press the “start button” -> The display will now change to G_1
- Bring the 7GS into 1. gear
- Press the “start button” -> The display will now change to G_2
- Enter 2
nd
gear
- Press the “start button” -> The display will now change to G_3
- Bring the 7GS into 3
rd
gear
- Press the “start button” -> The display will now change to G_4
- Enter reverse gear