User's Manual

LTD-1501 User's Manual TV Mode
LTD-1021 User Manual Page 3-5
Chapter 3 TV mode
Once you have completed the setup procedures stated in Chapter 2 you are
now ready to start to watch TV on the LTD-1021 for the first time.
3.1 Antenna setup
There are two ways to receive TV on the LTD-1021, once is via a TV-antenna,
the other is via a TV-cable. You need to select your preference first before
you can watch TV. Here is how to do that:
1. Turn on the LTD-1021
2. Click the TV button on the remote control
3. Click the Menu (2) button on the remote control
4. Click the Down arrow to select ‘INITIAL’ and press ‘ENTER’
5. Select ‘Auto Program’, press ‘ENTER’
6. Select ‘Channel Mode’, press ‘ENTER’
7. Now you may choose ‘CATV’ or ‘AIR’. By pressing the ‘UP’ or
‘DOWN’ (56) buttons, select your choice by pressing the
‘RETURN’ key (8 )
8. You will now be back to the ‘Auto Program’ menu, now select
the ‘Auto Scan’ and press ‘ENTER’
9. The LTD-1021 will scan through all your CATV or Air channels
and program them automatically.
Notice: Note that if you move the LTD-1021 from one location to
another, you may need to re-scan the TV channels since
TV and cable providers offer different signals in different
areas.
3.2 Fine tuning of certain TV stations
Some times you may want to fine tune a channel to adjust it’s setting, you
may do this by reading and following the instructions in Chapter 2.4.