User's Manual

LTD-1021 User's Manual Before you begin
LTD-1021 User Manual Page 2-5
Chapter 2 Before you begin
Plug in the power cable to the AC-adapter and the AC-cord into the LTD-1021.
Then you may turn on the power either on the unit itself or via the remote
control. See chapter 1 for locations of buttons and location of connectors if in
doubt.
2.1 Video Source
There are THREE buttons on the remote control to select the Source, these
are: TV / DVD / AV1 (AV2 is not used on the LTD-1021).
Select one of these modes either via the Remote control or by clicking the
Source button on the unit, if you click on the unit you may need to click up to
two times to go to the correct source.
If you want to watch a VHS movie or connect to your Video Camera, select
the AV1. Connect your respective device to the Video-In ports.
2.2 Menus
There are two different menu systems in the LTD-1021, one for TV and one
for DVD.
The TV menu can be selected by clicking the Menu button on the remote
control while in TV mode. Under DVD mode the Menu button will call up the
DVD menu.
To select a submenu click the ‘Enter’ button, to return to previous menu,
click the ‘Return’ button. To leave the Menu program, click ‘Return’ button on
the top menu.
Notice: First time you use the LTD-1021 it is preferable to go to
the TV menu, select ‘Initial’ and select your preferred
‘Language’.