User's Manual

LTD-1021 User's Manual Introduction
LTD-1021 User Manual Page 1-5
1.3 Setting up
To set up the LTD-1021 together with a VCR (for recording TV programs)
connect these cables:
1. Connect TV cable to the Antenna jack at ƒ
2. Connect the 3pcs AV cables from the VCR AV-IN to LTD-1021 AV-
OUT‚.
3. Connect the 3pcs AV cables from the VCR AV-OUT to LTD-1021
AV-IN at • or to an external TV, projector or other display device.
4. To record, set the VCR source to AV mode (see VCR manual), and
then you will be able to record TV programs from the LTD-1021.
If your VCR doesn’t have AV-in or out but a round S-Video connector, you
need to buy an S-Video to AV adaptor and connect it accordingly.
Notes: DVD movies are Macrovision-protected and will not be
able to be recorded onto VCR tapes or to DVD recorders.