User's Manual

Crystal RF Game Pad PS2 User’s Manual

Welcome to choose RF Game Pad PS2, please you familiarize thoroughly this

manual before starting to operate it.

FCC Regulatory Statement:

This device and its antenna must not be co-located or operating in conjunction

with any other antenna or transmitter.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Features :

1. Fully compatible with PlayStation®2, PlayStation® , and PS one™ and any

title of racing games.

2. With three different color LEDs to indicating difference motor vibrate

indication.

3. Two modes: Digital and Analog mode for experiencing different fun in

games.

4. synthetic soft rubber-covered gives you more comfortable.

5. the most distance is 30m in open side.

Installation:

1. Turn off your console.

2. Put the PS2 game disc into the PS2 console.

3. Connect the TV and PS2 console.

4. connect RF receiver and console.

5. put two batteries into pad and slid the “om/off” switch into “On” position.

6. Start your gaming and have fun.

* When connect successul, all the vibration LEDs will turn on (Green). If the

Crystal RF GamePad functions:

1. Mode indications:

Crystal RF gamepad has 2 different operation modes. which are indicated by the colored

LED on the pad.

PAGE 1
Crystal RF Game Pad PS2 User’s Manual Welcome to choose RF Game Pad PS2, please you familiarize thoroughly this manual before starting to operate it. FCC Regulatory Statement: This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Features : 1.
PAGE 2
Digital mode: Red LED power off. It is the default mode at start-up. Analog mode: Red LED power on. By pressing the mode button, while Green LED turns on, indicating that it is switched into Analog mode. Pressing the mode button for the second times will go back to the Digital mode, indicated by a Mode LED on. 2. Automatic Centering: Auto centering can detect the joystick center point when the console is powered on. Instead of scrolling through complex settings in the game “OPTION” menu. 3.
PAGE 3
If you want to stop the motors off, please press “Select” + “O” simultaneously, the motor vibrate will be off. Press the buttons again, motors vibrate will be On. Note: when under vibration Off mode, Logo LED will not change color any more. 7. Force connect function: When there are two or more than two RF controllers gaming meanwhile, you can thru force connect function to choose your favorite RF controller.