User's Manual

2.4G Bluetooth Mouse Users’ Guide

Installation.

1. Insert battery into the mouse.

2. This mouse provides factory default ID and so the link will be set up after a while.

3. Click the mouse key and her response will be read on the monitor.

Trouble Shooting

1. No connection between the mouse and the receiver.

Re-insert the receiver. Try to insert receiver to another USB port on your computer.

2. No any response on the mouse.

Take out the battery from the mouse and reinstall it with correct orientation. Try a

new battery if necessary.

Power Supply

DC3V supplied by the battery(2*1.5V)

Frequency Range

2402 ~ 2480 MHz

Modulation Technique

FHSS(GFSK)

Number of Channels

79 Channels

Antenna Specification

PCB Antenna

Gain: -0.32dBi (Max)

Note:

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Caution!

The manufacturer is not responsible for any

radio or TV interference caused by

unauthorized modifications to this equipment. Su

ch modifications could void the user

authority to operate the equipment.

PAGE 1
2.4G Bluetooth Mouse Users’ Guide Installation. 1. Insert battery into the mouse. 2. This mouse provides factory default ID and so the link will be set up after a while. 3. Click the mouse key and her response will be read on the monitor. Trouble Shooting 1. No connection between the mouse and the receiver. Re-insert the receiver. Try to insert receiver to another USB port on your computer. 2. No any response on the mouse. Take out the battery from the mouse and reinstall it with correct orientation.