User's Manual

4
SETTING UP THE AQUI
Your AQUI RF Crystal Mouse receiver connects to the USB or PS/2
port on your computer.
Note! Insert the batteries before connecting the AQUI RF Crystal Mouse.
Refer to the previous section.
Refer to the following instructions and illustrations to connect the AQUI
RF Crystal Mouse to your PC:
1. Turn off your computer.
2. Plug the USB connector
on the RF receiver cable
into the USB port on your
computer.
If you want to connect to
your computer’s PS/2
port, use the USB to PS/2
adapter.
Connect the adapter to
the RF receiver and then
connect the receiver to the
computer’s PS/2 port as
shown: