User's Manual

User Manual: Field Transmitter

2.2 Generic Mounting Bracket

The Generic Mounting Bracket allows for mounting in a number of locations using a variety of hardware. The

hole pattern on the bracket is sized to allow for:

• U-Bolt mounting in horizontal and vertical orientations.

• Strut Channel mounting in a number of orientations depending on holes selected.

• Even screw mounting directly to metal or wood substrates.

Figure 5: Variety of mounting options with generic bracket

For Strut Channel mounting it is recommended that a minimum of two screws be used with the Generic

Mounting Bracket.

Both the PCU and the sensors use

standard ½” NPT threads for

assembly. For locations where more

durability is required, sensors may be

mounted using standard ½” NPT

threaded pipe and associated fittings

to protect the sensor cable.

The PCU may be mounted anywhere a

convenient mounting surface is

available. A generic mount may be

used for mounting on a strut channel

with magnetic hardware, which enables

the device to be attached directly to a

pipe flange or flat surface. Syscor

mounting hardware uses up to three

Neodymium grade N38 magnets each

with a pull force of 90.4 lbs.

Figure 4: PCU with magnetic

mount to pipe flange

Figure 3: PCU with rigid pipe-mounted

sensor