Manualshelf

User's Manual

ManualsBrandsSyscor Controls & Automation ManualsElectronicsField transmitter for hydrocarbon sensor data
11121314151617181920
User Manual: Field Transmitter
PCU_User_Guide_1.3.0 10 © 2019 Syscor Controls & Automation Inc.
2.7 Network Configuration
Network configuration must be performed after battery installation in order to maximize battery life. Devices
that have not been configured will spend energy searching for a network to join. A Network Identity (ID) and
Join Key are required to join a WirelessHART
TM
network and they must match the Network ID and Join key
of the WirelessHART
TM
Gateway.
Network configuration can be completed using any HART handheld communicator. The HART terminals are
located inside the intrinsically safe front wiring compartment and are clearly marked.
2.7.1 Download Device Description
Download the latest device description at https://www.syscor.com/products.
Note: HART Registration of this device is pending. When achieved, you will also be able to download the
latest device description at www.hartcomm.org.