USER’S MANUAL M716D Contents 1
Safety Notices Getting ready to use the device What’s inside box Product Appearance Control buttons and connections Technical Specifications Quick Guide Power on / Power off Standby and Lock screen The desktop status bar and shortcut menu and the definition of the icons Orientation Sensor Setting Battery management and recharging WIFI network settings Mobile network settings To install an APK file To uninstall an APK file Camera Voice recording Use the device a multi med
1 ) Keep this device away from strong magnetic field to avoid any damages 2 ) Do not rub this device with any hard objects and never clean this device with any chemicals or detergents or acids or it could cause damages on surfaces. 3 ) Humidity or liquid may enter this device and causes permanent damages to the hardware inside. Do not place this device in any humid environment or under the rain.
17 ) For the sake of data safety, please back up the important data anytime on a timely basis. 18 ) When connecting this device with other equipments, please follow instructions on this user’s manual. 19 ) Never connect this device with any incompatible equipment. 20 ) Please consult the after-sales service in your area for any technical problems.
Technical Specifications LCD Display Operation System PC interface Built-in Flash Built-in RAM Capacity Expansion Battery Power Supply Music Function Video Function Size Resolution Android 4.2 9” TFT display 800*480 High speed USB2.0 HOST for external U-disk, Mouse, etc Flash Memory：8GB 1GB DDRIII Support Micro SD Card up to 32GB (not included) Built-in 3.7V Lithium rechargeable battery Input: AC100V~240V 50/ 60Hz Output: DC 5V-2A WMA、MP3、OGG、APE、FLAC、 Format AAC、WAV Headset max.
Photo browse E-book Function Recording function WI-FI Function HDMI 3G Auto Screen Rotation Loudspeaker Working temperature OSD Languages Operation systems supported JPG、JPEG、BMP、GIF supported TXT、LRC、PDF、Html、 Format Supported Htm、EPUB, etc Max. capacity 20M Format supported 3gpp Format Spec 802.11b/g/n Transmission rate Max150Mbps Transmission Distance Max100m Work Frequency 2.
Quick Guide Power on / Power off Long press button for 3 seconds to power on the device. It will take about a minute and half to boot the system. Unlock the screen by sliding to the right. To power off the device, long press button for 3 seconds, the screen will show the power off options: Cancel or OK. Tap “OK” to power off the unit or tap “Cancel” to exit to previous operation.
【Note】When the device is low battery, it will alert continuously and will shut down automatically when battery has completely run out. The device cannot be powered on if the battery is empty, please recharge the battery at least one minute before restart the device. Standby and Lock screen Press button shortly to turn the device to standby mode. Under standby mode, the screen is blackout and volume is muted. again to reactivate the device.
【Note】The primary operation of the device under standby mode will pause and the primary operation of the device under Lock screen mode will continue, only the screen is locked.
Tap it to adjust the volume Tap it to go to a shortcut menu for: “Wallpaper” - select wallpaper for the home screen. “Manage apps” - go a list of installed applications. “System Setting” - go to Setting menu directly. The USB icon appears only when the device is connected to a USB device successfully. The Android logo appears only when the device is connected to a computer. The micro SD card icon appears only when a micro SD is inserted into the device.
The Orientation sensor can be activated or deactivated in the Setting menu: Setting Display Auto-rotate screen. Tick the box if you want to activate the sensor or un-tick the box to deactivate this function. Battery management and recharging a. Recharge the battery about 3 to 5 hours to make sure the battery is fully charged at the first time. b.
device. 【Note】In order to keep the battery in the best condition, please pay attention to the below: Don’t recharge the device under high temperature. Don’t release the power of the battery, you can charge the battery when there is still power in the battery. It is not necessary to wait the battery to completely run out before recharging. To maintain the battery with a long life span, keep recharging the battery once every two weeks in the case if you don’t use the device for a long time.
Enter the password and tap “Connect” or tap “Cancel” to exit to previous screen. Mobile network settings From desktop, Tap to enter setting menu and tap “More…” to enter the sub-menu and tap “Mobile networks” to enter Mobile network setting.
enter the appropriate data required by the 3G network provider.
To install an APK file This device supports third part Application Program .APK files. From desktop, Tap to enter application menu and tap to enter APK installer tool or; From desktop, Tap to enter application menu and tap to enter a list of file and tap on the desire APK file to install the APK directly. To uninstall an APK file From desktop, Tap installed application. to enter setting menu and tap “Apps” to enter a list of Tap the desired APK file and tap “Uninstall” to confirm.
Camera This device has a built-in 0.3MPIXEL front camera and a built-in 2.0MPIXEL rear camera for photo, video and web cam. From desktop, Tap to enter application menu and tap to enter camera mode. Tap to switch between front camera and rear camera. Tap to enter photo mode or tap Slide between and to enter video mode. to zoom in and out. Taking a photo: In photo mode, tap Tap to take a photo. to enter a sub-menu.
Cloudy - Exposure: set exposure between +4 to -4 - Exit sub-menu - Camera settings: set store location, picture size,picture quality and restore defaults You can find the photo files from Application menu File Manger DCIM Camera Taking a video: In video mode, tap Tap to start the video recording and tap to stop. to enter a sub-menu.
Voice Recording This device has a built-in microphone for voice recording and web cam. From desktop, Tap to enter application menu and tap enter voice recording mode. Tap to start recording. Tap to stop recording. Tap to review the section just recorded. To save the recording, tap “DONE” and exit to Application menu or; Tap “Discard” to erase the recording and exit to Application menu You can find the saved file from Application menu File Manger.
From desktop, tap to enter Application menu. Tap to enter audio playback mode. Only music files stored in the device will be shown in the file list. You can classify the music file list by: ARTISTS, ALBUMS, SONGS, PLAYLISTS and NOW PLAYING by selecting the appropriate option. Tap a song to start playback. On playback interface, you can tap on the function bar to adjust the playback time, backward/previous, forward/next, play, pause, shuffle, repeat setting, etc.
Video playback: From desktop, tap to enter Application menu. Tap to enter video / photo mode. Only videos files, photo files stored in the device and videos/photos taken from the built-in camera will be shown in the file list.
Tap on “MOVIES” to enter a list of preview videos. Tap any video file to enter the playback screen and tap on the play icon to start playback. You can adjust the playback time by sliding the time bar, or adjust the volume by tapping Tap or . Tap to go to the previous screen. for previous, play, next. Tap to enter the sub-menu for subtitles, audio and screen ratio settings for the videos or movies.
From desktop, tap to enter Application menu. Tap to enter video / photo mode. Only videos files, photo files stored in the device and videos/photos taken from the built-in camera will be shown in the file list. Tap on “PICTURES” to enter a thumbnail of photos. Press on the thumbnail of a photo to access a full-sized version.
Get a closer look at a photo by double tapping the screen. Two taps will magnify the image. Another two taps will return to the original view. A tap on the screen, a thumbnail of photos will appear and you can tap on any photo to move from one photo to another. Enlarge an image by touching the image with two fingers and spreading them toward the edges of the screen. Pinch the image back to original size by bringing your index finger and thumb together.
You can also delete, rename, copy, move or email a file by pressing on the file for 1 second, a pop up menu will appears: Set OSD Language 24
You can set the display language of the device from the list of available language provided in the device. Go to desktop Setting Language & Input Language & input Tap on “Language” to enter a list of OSD language options and tap on the desired language and it will be set instantly.
Set Keyboard You can select a keyboard input method from Setting. Go to desktop Setting Language & Input Language & input Select from the list of Keyboard & Input methods. Any keyboard input method APKS installed in the device can be also find from this list of Keyboard & Input methods.
Tap on to enter Android keyboard settings menu: From the Android keyboard settings menu, you can setup: 27
Auto-capitalization Vibrate on keypress (not available in this device) Sound on keypress Show settings key Auto correction Show correction suggestions Advance settings for the above features Set Date and Time You can set system date and time from Setting. Go to desktop Setting Date & time You can setup Automatic date & time, Automatic time zone, Set date, Set time, Select time zone, Use 24-hour format, and Select date format.
About the Device You can get a quick view on the device status such as firmware version, battery consumption status, battery level, model no.
Troubleshooting Can not turn on the device? You may not be able to turn on the device when the battery is below the critical level. Recharge the battery for a few minutes and try to turn it on again. Check if the power charger is connected properly and firmly. The battery working time is too short? The duration of the lithium battery varies with environmental temperature changes and the service conditions.
Check whether the audio file is damaged and try to play other audio files to confirm. In the case if the audio file is damaged, it may cause severe noise or staccato. Can not copy files? Check if the device is connected to the computer properly. Check if the USB cable is working. Check whether the memory capacity available is enough for storage of the copying files.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Specifications are subject to change without prior notice.
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
