User's Manual

12
MIFARE (Mifare only)
※
※※
※Please set the MIFARE Key before you change the Key in EEPROM.
The following sections will describe the different functions as below.
1. Card Data Read/Write Test
When user intend to read/write the card data that could tick the "EEPROM" to use the "Key" in
the EEPROM (the prerequisite is the "Key" must has been stored in EEPROM already) or
manually input the Key value for verifying.
Then select correct block and fill out the Read or Write Card Data field and click UID 、 Read
Card Data or Write Card Data to finish the read/write action.
2. Read Card All Data
Click Read Card All Data or Read Card All Data Loop to read card data.