Data Sheet

SBF508M‐21V Datasheet
Confidential Syntronix Corporation 5
RP-PJ8

The host product with the module installed must be evaluated for simultaneous transmission
requirements.

The users manual for the host product must clearly indicate the operating requirements and
conditions that must be observed to ensure compliance with current FCC RF exposure
guidelines.

To comply with FCC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only
exposure condition must not exceed 0dBi.

OEM Guidance
1. Applicable FCC rules
This module is granted by Single Modular Approval. It complies to the requirements of FCC
part 15.247.
2. The specific operational use conditions
This module can be used in lot devices. The input voltage to the module is nominally
DC3.3V. The operational ambient temperature of the module is -40 °C - 85°C. The PCB
antenna has been fixed, any other external antenna is prohibited.
3. Limited module procedures
N/A
4. Trace antenna design
N/A
5. RF exposure considerations
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body. If the equipment built into a host as a portable usage,
the additional RF exposure evaluation may be required as specified by 2.1093.
6. Antenna
Antenna type: PCB antenna Peak gain: 0dBi