Data Sheet

SBF508M‐21V Datasheet
Confidential Syntronix Corporation 11
RP-PJ8
C/I
Mode Parameter Conditions Sensitivity Unit
1Mbps
Adjacent +2 MHz
interference
BER < 0.1% -45 dB
1Mbps
Adjacent -3 MHz
interference
BER < 0.1% -45 dB
1Mbps
Adjacent +3 MHz
interference
BER < 0.1% -49 dB
2Mbps
Co-Channel
interference
BER < 0.1% 4 dB
2Mbps
Adjacent -2 MHz
interference
BER < 0.1% -19 dB
2Mbps
Adjacent +2 MHz
interference
BER < 0.1% -24 dB
2Mbps
Adjacent -4 MHz
interference
BER < 0.1% -25 dB
2Mbps
Adjacent +4 MHz
interference
BER < 0.1% -54 dB
2Mbps
Adjacent -6 MHz
interference
BER < 0.1% -53 dB
2Mbps
Adjacent +6 MHz
interference
BER < 0.1% -56 dB
PBL
I
Block performance
30 –2000MHz
Min= -10 0 dBm
II
Block performance
2000 –2399MHz
Min= -27 -6 dBm
III
Block performance
2484 –3000MHz
Min= -27 -3 dBm
IV
Block performance
3 –12.75GHz
Min= -10 0 dBm
IMD
1M Intermodulation performance Min= -50 -48 dBm
2M Intermodulation performance Min= -50 -43 dBm
Table 5-1 General specification
Note 1:
1) The absolute maximum rating of VBAT is 3.6V, make sure the applied power supply does not
exceed it.
2) The external capacitor of VBAT PIN should be < 100uF because the module already has build-in
capacitors.