Spec Sheet

Applications:
Commercial Cleaning
Residential Home Cleaning
Sanitation
Mold Remover
Mold Release
Available Packaging:
8 lb Containers
Tech Specs:
Color……...….……......Y.ellow
Odor…..……..………...Bleach
pH....................................13
Form…………………...Powder
Flash Point……………...212°F
Foam………………….......Low
Biodegradable………...100%
House & Wood Care
Powder House
Heavy Duty Powdered Mold & Midew Remover
WHAT IS POWDER HOUSE?
PowderHouse is a powdered mold & mildew remover specially formulated with heavy
duty detergents and sodium hypochlorite to remove the toughest mold and mildew
stains. This product is as active as heavy duty chlorine solutions, and is much more
stable and safer to handle. PowderHouse eliminates corrosive handling and evapora-
tion of conventional Mold & Mildew Removers. Mix with water, spray on and watch
the stains disappear. Product has low levels of foam for enhanced cleaning.
BENEFITS:
Removes mold & mildew without scrubbing.•
Allows for safe handling of bleach.•
Twice as stable as Chlorine Bleach.•
More economical and easier to use than conventional methods.•
Contains boosters that enhance the productivity of the solution.•
Very economical in use.•
Can be used for residential use as well as commercial use.•
PowerHouse actually kills the bacteria needed to allow regrowth of mold and •
mildew.
DIRECTIONS FOR USE:
Before using, make sure that the desired surface is cool to prevent early evaporation.
Read MSDS and test in a small inconspicuous area.
Consult your local Syntec Representative for specifi c use instructions.
IF DILUTED SOLUTION IS GOING TO SIT FOR ANY PERIOD OF TIME, OR WILL BE IN
CONTACT WITH WARM AIR, MUST KEEP IN A VENTED CONTAINER OR CONTAINER
COULD BURST!
Make sure to use proper protective clothing when applying this or any chemical.
synthetic labs
24 Victory Lane, Dracut, MA 01826
800.255.4050 www.syntecpro.com
S
S
S
YNTEC
YNTEC
YNTEC
YNTEC
Reorder No. 2668