Owner's Manual

4
Section 3 Display Asmble
*
The connection between the bracket and
the
Display head is a simple locking
mechanism
that does not require any tools
to be used, but requires extra
force to install
or detach. Please be advised to tuck into the
slot and push very hard to lock in position
or detach.
LOCK
UNLOCK
Mount the PE clamp next to the handle, near
the prepared hole for the snap hook. The hole,
where the
sensor will be fixed later, must point
downwards.
screw
Remove the first nut from the sensor and
insert the sensor into the hole. Please make
sure that the
sensor is pointing inwards.
Then screw the nut back onto the sensor and
tighten it
Connect the sensor cable to the
computer cable.