User`s guide

12
Chapter2:SetUpRX1211/RX1211RP
•
For 2.5” Hard Disk:
Placetheharddiskintheharddrivetray,turnthetray
upsidedown,andthentightenthescrewstosecuretheharddisk.
3
Inserttheloadedharddrivetrayintotheemptyharddrivebay.
Important:
Makesurethetrayispushedinalltheway.Otherwise,theharddisk
mightnotbeabletofunctionproperly.
4
Pushthecliptoxtheharddisktray.
5
Repeatthestepsabovetoassembleallharddisksyouhaveprepared.
Note:
IfyouwanttosetupaRAIDset,itisrecommendedthatallinstalledhard
disksareofthesamesizetomakethebestuseofharddiskcapacity.