User Manual

8 Chapter 1: Set up Your Synology Router
Note: During Soft Reset, the LED indicators behave as below:
1. The STATUS LED turns static orange on the RT1900ac model, blinking orange on the RT2600ac, and static
blue on the MR2200ac model. The other LEDs become inactive for up to 30 seconds until the reset is complete.
2. The STATUS LED turns green (Soft Reset is complete) on the RT1900ac and RT2600ac model, blinking blue
on the MR2200ac model, and the other LEDs become active and behave as stated in the respective Hardware
Installation Guide.
• For ten seconds (Hard Reset): The system will be reset to the factory default. The data stored in the
external storages will remain intact.
Note: During Hard Reset, the LED indicators behave as below:
1. The STATUS LED turns blinking orange on the RT1900ac model, static orange on the RT2600ac, and static
blue on the MR2200ac model. The other LEDs become inactive for up to four minutes until the reset is complete.
2. The STATUS LED turns green (Hard Reset is complete), on the RT1900ac and RT2600ac model, blinking
blue on the MR2200ac, and the other LEDs become active and behave as stated in the respective Hardware
Installation Guide.