Manualshelf

User Manual

ManualsBrandsSYNOLOGY ManualsComputers & LaptopsSynology RT2600AC IEEE 802.11ac Ethernet Wireless Router - 2.40 GHz ISM Band - 5 GHz UNII Band(4 x External) - 2600 Mbit/s Wirel
21222324252627282930
30 Chapter 14: FAQ
Why can't I boost a device's signal with beamforming?
• Only six devices can concurrently receive beamforming.
• Make sure your device supports beamforming too. This means the device must conform to the 802.11ac
standards.
• RT2600ac performs beamforming for all its Wi-Fi connections by default, and does not provide relevant option
on the management interface.
Which Wi-Fi frequency (2.4GHz and 5GHz) should I choose?
Please see "Set up Your Wi-Fi Connection".
Why can't I nd the router's 5GHz Wi-Fi network?
Due to previous NCC (National Communications Commission) regulations, in Taiwan wireless devices
manufactured before 2009 cannot make use of the 5GHz Wi-Fi channels 36-48. To help such wireless devices
connect to the 5GHz Wi-Fi network, you should use alternative channels rather than channels 36-48 (at Wi-Fi
Connect > Wireless > Wi-Fi > 5GHz > Advanced options).