Manualshelf

User Manual

ManualsBrandsSYNOLOGY ManualsComputers & LaptopsSynology RT2600AC IEEE 802.11ac Ethernet Wireless Router - 2.40 GHz ISM Band - 5 GHz UNII Band(4 x External) - 2600 Mbit/s Wirel
11121314151617181920
12 Chapter 3: Set up Your Wi-Fi Connection
Create WPS Networks (2.4GHz & 5GHz)
WPS (Wi-Fi Protected Setup) is a standard promoted by the Wi-Fi Alliance to simplify Wi-Fi security settings for
users. Though the setup is quick, the WPS network may not be secure. To keep the WPS network safe, you can
use a push button or a PIN code.
Three ways are available to quickly set up a Wi-Fi network via WPS:
By push button:
1 Go to Wi-Fi Connect > Wireless > WPS, and select Enable WPS. Alternatively, press the WPS button on your
Synology Router.
2 Enable the WPS function on your wireless device. Your wireless device and the Synology Router will be paired
up.
By AP PIN code:
1 Go to Wi-Fi Connect > Wireless > WPS > Device PIN > By AP PIN code, and click Enable to generate an
AP PIN code.
2 Enter the generated PIN code into your wireless device. Your wireless device and the Synology Router will be
paired up.
By client PIN code:
1 Enter the PIN code of your wireless device at Wi-Fi Connect > Wireless > WPS > Device PIN > By client
PIN code.
2 Click Register. Your wireless device and the Synology Router will be paired up.
Note: Client iOS devices cannot join a WPS network because iOS does not support WPS.