Manualshelf

Owners manual

ManualsBrandsSYNOLOGY ManualsComputers & LaptopsSynology RT2600AC IEEE 802.11ac Ethernet Wireless Router - 2.40 GHz ISM Band - 5 GHz UNII Band(4 x External) - 2600 Mbit/s Wirel
12345678910
10
Chapter 2: Choose the Operation Mode
Wireless Client
Under this mode, your Synology Router works as a Wi-Fi Ethernet adapter and connects to the Wi-Fi signal from
another router or access point for Internet access.
Wireless Client is recommended in the scenario below:
• When you need Internet access, but a wired connection is hard to set up between your Synology Router and
another router/ISP modem
Below is the suggested usage:
• Clients have to connect to the Synology Router (at the LAN port) with a network cable for Internet access.
Note:
1. This operation mode is available on RT1900ac.
2. Under this mode, your Synology Router must be within the range of the Wi-Fi source. A poor signal from the Wi-Fi
source may result in unstable or poor connection quality.
3. Wireless client devices cannot connect to the Synology Router to access the Internet.