Manualshelf

Installation Manual

ManualsBrandsSYNOLOGY ManualsComputers & LaptopsSynology RT2600AC IEEE 802.11ac Ethernet Wireless Router - 2.40 GHz ISM Band - 5 GHz UNII Band(4 x External) - 2600 Mbit/s Wirel
12345678910
8
Chapter 2: Set up Your Synology Router
2
Connect one end of the power adapter to the power port on your Synology Router, and the other end to the
power outlet. Press the power button to power on your Synology Router. Wait for up to two minutes until the
STATUS and WAN LED indicators turn green.
3
Connect wired/wireless client devices to your Synology Router:
•
For wired devices
: Use network cables to connect devices to the LAN ports. The corresponding LAN LED
indicators should turn orange/green to indicate successful connection.
•
For wireless devices
:
1
When the 2.4G/5G LED indicators have turned static green, the Synology Router is ready to connect with
other devices.
2
Use your wireless device to scan and join the Wi-Fi network created by your Synology Router.
Note:
Below are the default credentials for the Wi-Fi network:
• Wi-Fi SSID:
SynologyRouter
• Password:
synology
The default credentials can be changed during the initial SRM setup.