User manual

12
Chapter 2: Setting Up
3
Load drives in the drive trays:
•
For 3.5” drives:
Place the drive in the drive tray. Turn the tray upside
down and tighten screws into the four spots indicated below to secure the
drive.
•
For 2.5” drives:
Place the drive in the drive tray. Turn the tray upside
down and tighten screws into the four spots indicated below to secure the
drive.
4
Insert the loaded drive tray into the empty drive bay.
Note:
Make sure the tray is pushed in all the way. Otherwise, the drive might not be
able to function properly.
5
Press the handle in ush with the front panel to hold the drive tray in place.