User`s guide

12
Chapter2:SetUpDX1211
•
For 3.5” Hard Disk:
Placetheharddiskintheharddrivetray,andthen
tightenthescrewstosecuretheharddisk.
•
For 2.5” Hard Disk:
Placetheharddiskintheharddrivetray,turnthetray
upsidedown,andthentightenthescrewstosecuretheharddisk.
3
Inserttheloadedharddrivetrayintotheemptyharddrivebay.
Important:
Makesurethetrayispushedinalltheway.Otherwise,theharddisk
mightnotbeabletofunctionproperly.
4
Pushthecliptoxtheharddrivetray.