Datasheet

Table Of Contents

Terms & Conditions | Privacy

The license can be applied to only one Synology product at a time.

Online verification is required for adding or deleting device licenses.

If there are more than one Synology product under the CMS setup, the included device license can be shared among the

CMS cluster. Learn more about CMS.

In the table above, you can see a detailed example of our billing methods for four different camera

types. Certain panoramic cameras (e.g. Axis M3007) which support native dewarping may provide

more than one stream (e.g. Quad View, Double Panorama, and Original View) at a time. Each of

regular and panoramic cameras requires one license only.

There are two types of multi-lens cameras: fixed lens and removable lens. Fixed lens cameras which

provide more than one stream at a time will require one license only. For removable lens cameras or

fixed lens IP cameras, Synology will charge you per channel. Take Axis F44 for example. Axis F44

(with at most four lenses) provides up to five channels of video stream. The four channels are

corresponded to by the four lenses, and the fifth channel is the view of all four cameras combined. If

you wish to display all five channels in Surveillance Station, Synology will charge you for five licenses

accordingly. Let's take Axis Q3709-PVE as another example (with at most three lenses). Axis Q3709-

PVE provides three channels of video stream. If you want to display all three channels in Surveillance

Station, Synology will charge you for three licenses.

Video servers such as Vivotek VS8801 can connect to up to eight analog cameras. In this case,

Synology will charge you for eight licenses accordingly. This rule will also apply to video servers

supported in Surveillance Station.

License Activation and Restrictions

In Surveillance Station, go to Main Menu > License > then click Add. An installation wizard will guide

you through adding device licenses into Surveillance Station.

Note: