User`s guide

Synology DiskStation User's Guide
Based on DSM 4.1
173 Chapter 18: Perform Advanced Management Tasks
Note:
 Entering the Name, Location, and Email will help you identify your Synology DiskStation. These fields are
optional.
 IPv4 and IPv6 are supported by SNMP service.
 SNMP service supports SNMPv1, SNMPv2c and SNMPv3 simultaneously.
Enable Terminal Services
Go to Main Menu > Control Panel > Terminal to enable Terminal service, allowing you to use Telnet or SSH to
log in to Synology DiskStation and modify its settings.
To enable connection to Synology DiskStation via Telnet or SSH:
1 Do any of the following:
 If you want to enable the Telnet service, tick Enable Telnet service.
 If you want to enable the SSH service, tick Enable SSH service.
Note: When you disable the SSH service, all SSH tasks will be terminated immediately. If you disable the SSH
service while performing a backup task, perform the task again after the SSH service is disabled.
2 Click Apply.
Important: Use the Terminal service with caution. Improper manipulation or modification to Synology DiskStation
may result in system malfunction or data loss.