SYNLawn Artificial Grass Care and Maintenance Manual

Care and Maintenance Manual
SCM.v140324 | 02/18/2019 | Page 2
INTRODUCTION
Thank you for choosing SYNLawn
®
. Even though your SYNLawn
®
does not require the traditional
maintenance of natural grass, there are maintenance procedures that can help protect your investment
and extend the useful life of your SYNLawn
®
brand turf.
The following procedures are important in helping to preserve your turf.
Keep it clean
Brush periodically
Do no abuse
Report any problems promptly to your SYNLawn® dealer
INITIAL REQUIREMENTS
SYNLawn
®
products/systems require a minimum two (2) week stabilization period. This period of time
varies depending on local conditions, use, and product/system specications. During this time, it may
be necessary to make minor adjustments to the product and installation.
You should also review the Warranty provided to you for specic prohibitions and limitations conrmed
therein.
If you have further questions, contact your local SYNLawn
®
dealer or contact SYNLawn
®
at 2680
Abutment Road, Dalton, GA 30721 or telephone us at 866-796-5296.
CLEANING AND STAIN REMOVAL
I. Keep it clean
A. Dust, pollen, and airborne pollutants
Rainfall is the best cleanser. In areas where rainfall is scarce, an occasional water ush is
benecial to cleanse the turf. For lightly soiled areas, it may be necessary to sponge mop
with a ve (5) percent solution of low sudsing household detergent in hot water followed
by a thorough rinsing with hot water. For heavily soiled areas, repeat procedure for lightly
soiled areas follow with sponge mopping using a three (3) percent solution of household
ammonia in hot water followed by a thorough rinsing with hot water.
Synlawn
®
makes no representation, guarantees or warranties, express or implied,
regarding the information contained herein.