User Manual

IMPORTANT: Apply BLUE threadlocker
where indicated and do not overtighten.
To ensure proper fit, wear, and a
predictable lifespan, main shaft
bearings are secured via threadlocker
and pre-assembled. Heat will be
required for replacement. Apply
GREEN or RED threadlocker when
replacing.
!
!
!
516-203
Main Shaft Bearing Block - Top
516-204
Main Shaft Bearing Block - Mid
108-104
10x15x4 Radial Bearing
108-104
10x15x4 Radial Bearing (2)
516-205
Main Shaft Bearing Block - Third
100-204
M2x4 Socket Head (2)
100-273
M2 Washer (2)
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
02 | FRAME
5
Rev 1.0M
MAIN SHAFT BLOCKS