User Manual

IMPORTANT: Left and right frames
are not similar. Take care to use correct
frame and orientation at this step. The
left frame (previous page) contains the
cut out for the tail servo and mount
hole for the spring post.
IMPORTANT: Install battery tray rail as
indicated with the rail slot positioned
near the bottom. Use CA to secure bolts
and do not overtighten.
101-306
M3x6 Button Head (3)
516-202
Main Frame Right
516-215
Battery Tray Rail
101-306
M3x6 Button Head
105-117
Key Chain Canopy Mount, Female 17mm
Apply Medium
Viscosity CA to all (3)
battery tray rail bolts
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
02 | FRAME
4
Rev 1.0M
RIGHT FRAME