User Manual

x2
Large flat side contacts the bearing
IMPORTANT: Disassembly is required.
To prevent damaging bolt 100-316,
remove linkage with set screw 100-272
before any disassembly.
Apply BLUE threadlocker to all radius
arm bolts and set screws.
IMPORTANT: Pinch bolts 100-320A
should have equal torque applied.
Do not overtighten. Apply BLUE
threadlocker.
!
100-316
M3x16 Socket Head
108-383
3x8x3 Radial
Bearing (4)
516-105
Anti-Rotation Arm
100-320A
M3x20 Shouldered Bolt
106-301
M3 Shim
109-352
3x5x2 Brass Spacer (2)
100-272
M2.5x12 Set Screw
107-099A
Modified Plastic Link
(for 2.5MM threads)
NOT 107-099
766-206
Ball Link Adapter
100-320A
M3x20 Shouldered Bolt
106-301
M3 Shim
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
13 | MAIN HEAD
36
Rev 1.0M
RADIUS ARMS | HEAD INSTALLATION