User Manual

TIP: Extreme pressure synthetic grease
is recommended for dampers and axle
rocker. Verify ALL points of contact are
greased prior to installation. Use Boto-
Lube Part BD-001.
IMPORTANT: Full disassembly of
the head is required. Apply RED
threadlocker to both main head axle
bolts and tighten firmly.
!
!
GREASE COMPONENTS
AXLE BOLTS
Apply
RED threadlocker
and tighten securely.
!
!
IMPORTANT: Apply threadlocker
to inside threads of the Head Axle
rather than the Socket Head bolt.
This will prevent threadlocker from
contaminating the radial bearing, which
may cause it to seize.
606-803
Solid Head Damper
606-803
Solid Head Damper
516-103
Head Axle
516-100
Head Block
100-512
M5x12 Socket Head
100-512
M5x12 Socket Head
100-320A
M3x20 Shouldered Bolt
100-351
M3 Nylock Nut
100-554
M5 Washer
100-554
M5 Washer
106-803
8x12x1.0mm Washer (2)
305-204
Axle Pivot
DO NOT OVERTIGHTEN!
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
13 | MAIN HEAD
35
Rev 1.0M
MAIN HEAD BLOCK