User Manual

IMPORTANT: Left and right frames are
not identical. Take care to use correct
frame and orientation at this step. The
left frame contains the cut out for the
tail servo and mount hole for the spring
post.
IMPORTANT: Install battery tray rail as
indicated with the rail slot positioned
near the bottom. Use CA to secure bolts
and do not overtighten.
Apply Medium
Viscosity CA to all
battery tray rail bolts
100-274
M2.5 Washer
516-215
Battery Tray Rail
305-112
Elevator Tail Servo Mount
101-306
M3x6 Button Head (3)
100-266
M2.5x6 Socket Head (4)
105-117 Key Chain Canopy
Mount, Female 17mm
516-219
Spring Post
107-110
Pivot Ball 2.5mm x 4.5mm
101-306
M3x6 Button Head
100-266
M2.5x6 Socket Head
516-201
Main Frame Left
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
02 | FRAME
3
Rev 1.0M
LEFT FRAME