User Manual

90°
IMPORTANT: Adjust belt tension by
sliding tail box until tension arm is
positioned 90 degrees to the frame,
then secure with indicated bolt.
NOTE: Verify tailbox alignment, vertical
fin should be parallel to the frames.
516-223
Tension Spring
100-310
M3x10 Socket Head (2)
DO NOT OVERTIGHTEN!
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
08 | SETTING BELT TENSION
27
Rev 1.0M
BELT TENSION SETTING