User Manual

IMPORTANT: Disassemble and apply
a small amount of RED threadlocker to
the brass sleeve and tighten gently. DO
NOT OVERTIGHTEN or damage can
occur.
IMPORTANT: Disassemble and apply
RED threadlocker to 107-109 Tail Pitch
Pivot Ball.
IMPORTANT: Brass sleeve is REVERSE
THREADED. Use caution while
threading.
!
!
!
!
320-320
Tail Pitch Slider Threaded
108-812
8x12x2.5 Radial Bearing
320-319
Tail Bearing Ring Aluminum
109-813
8x10x3 Brass Spacer
108-812
8x12x2.5 Radial Bearing
606-921
Tail Pitch Link Pin (2)
506-920
E-Ring (2)
107-109
Tail Pitch Pivot Ball
320-321
Tail Pitch Plate Threaded
115-322
Tail Pitch Link (2)
!
NOT 107-110
OR 107-106
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
07 | TAIL ASSEMBLY
24
Rev 1.0M
TAIL - PITCH SLIDER