User Manual

IMPORTANT: Remove and secure pivot
ball using RED threadlocker.
TIP: CA may be used to secure Bell
Crank Insert Guide.
!
100-351
M3 nylock Nut
516-408
Tail Lever Mount
766-416
Bell Crank Delrin Bushing
516-410
Tail Rotor Bell Crank
100-325A
M3x25 Shouldered Bolt
108-373
3x7x3 Radial Bearing
108-373
3x7x3 Radial Bearing
109-357
3x5x7 Brass Spacer
107-110
Pivot Ball 2.5mm x 4.5mm
01 | INTRODUCTION
02 | FRAME
03 | LANDING GEAR
04 | BELT TENSION ARM
05 | MAIN DRIVE
06 | BOOM INSTALLATION
07 | TAIL ASSEMBLY
08 | SETTING BELT TENSION
09 | SWASH PLATE
10 | CYCLIC SERVOS
11 | ANTI-ROTATION GUIDE
12 | TAIL SERVO
13 | MAIN HEAD
14 | PITCH LINKAGES
15 | MOTOR INSTALLATION
16 | BATTERY TRAY & CANOPY
17 | BLADE INSTALLATION
18 | COMPLETE MODEL
07 | TAIL ASSEMBLY
19
Rev 1.0M
TAIL - TAIL PITCH LEVER